SENSORS - ΑΙΣΘΗΤΗΡΕΣ

When installing air heaters on boats and yachts and in motorhomes, installation is carried out in remote and hidden places. This is done both to reduce noise from the heater in the room, and for safety reasons. In order for the control unit to receive up-to-date information about the ambient tempera..

WATER HEATERΚΑΥΣΤΗΡΕΣ WEBASTOΑΝΤΑΛΛΑΚΤΙΚΑCeramic temperature sensor in the combustion chamber. Resistance at 25°C 2.6-3.4 Ohm. At 800-1000°C 12-15 Ohm. Test current no more than 5 mA (standard multimeter). Has similar characteristics to Thermo 90, 90S, 90ST. Differs in connector.Compatib..

Made in the form of a metal capsule with a built-in photodiode. In the presence of combustion inside the hair dryer, the metal is heated to red and the photodiode begins to generate an electric current.Compatible with Webasto : HL 24 , HL 32 Spare parts group : Sensors Voltage : 12 Volt , 24 V..

Optical flame sensor for heaters Webasto DBW 2010 Sensoric and Webasto DBW 2012 SensoricCompatible with Webasto : DBW 2010 Sensoric , DBW 2012 Sensoric Group of spare parts : Sensors Voltage : 12 Volt , 24 Volt Spare parts application : Electric Manufacturer : Webasto Type of heater : Fluid..

Aluminum heat exchanger with direct outlet to silencer. It is also possible to install on heaters for some modifications of Webasto Thermo Top VEVO and Thermo Top V heaters. Specify additionally. The temperature sensors that are installed in the heat exchangers are conditionally not replaceable. Whe..

Aluminum heat exchanger with direct outlet to silencer. It is also possible to install on heaters for some modifications of Webasto Thermo Top VEVO and Thermo Top V heaters. Specify additionally. The temperature sensors that are installed in the heat exchangers are conditionally not replaceable. Whe..

It is mounted on an aluminum heat exchanger and stops the operation of the hair dryer in case of exceeding critical temperatures. The operation of the heater stops when the temperature of the outgoing air exceeds 150°C. Most often it works when the outlet on the hair dryer is closed and the air ..

It is mounted on an aluminum heat exchanger and stops the operation of the hair dryer in case of exceeding critical temperatures. The operation of the heater stops when the temperature of the outgoing air exceeds 150°C or when the body is heated above 80°C. Most often it works when the outle..

It is mounted on an aluminum heat exchanger and stops the operation of the hair dryer in case of exceeding critical temperatures. The operation of the heater stops when the temperature of the outgoing air exceeds 150°C or when the body is heated above 80°C. Most often it works when the outle..

Overheat sensor +117°. Green wires. Serves for emergency shutdown of the heater when the critical temperature is reached. Installed on heaters Webasto DBW2010, Webasto DBW2020, Webasto DBW2012, Webasto DBW2016, Webasto DBW300, Webasto DBW350, (2010.26/.30/.51/.52/.31/.35/.40/.65 / 2012 DBW 300.1..

A bimetallic sensor is mounted on an aluminum heat exchanger and stops the operation of the hair dryer if critical temperatures are exceeded. The heater operation stops when the outlet air temperature exceeds 170+-9°C. Most often it works when the outlet on the hair dryer is closed and the air c..

It is mounted on an aluminum heat exchanger and stops the operation of the hair dryer in case of exceeding critical temperatures. The operation of the heater stops when the temperature of the outgoing air exceeds 170°C or when the housing is heated to more than 80°C. Most often it works when..